Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Figure 1 VALVE SPRING - REMOVE/INSTALL (HEAD ON)
Installation - Cylinder Head Off
INSTALLATION - CYLINDER HEAD OFF
1. If removed, install a new valve stem seal.
2. Position valve spring and retainer on spring seat.
3. Using Special Tool C-3422-D with 8464 Adapter (Figure 2), compress the spring only enough to install the valve retainer locks. Install valve
retainer locks.
4. Slowly release the spring tension. Ensure the retainer locks are seated properly (Figure 1).
Figure 1 VALVE SPRING INSTALLED
