Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Auxiliary Cabin Heater Fuel Pump: Service and Repair
Installation
INSTALLATION
1. Position the dosing pump to the vehicle and onto the rubber isolator.
2. Connect the fuel line between the dosing pump and the cabin heater unit.
NOTE: The connectors should point towards the cabin heater fuel line.
3. Connect the heater fuel hose to the dosing pump.
4. Install the clamp that secures the heater fuel hose to the dosing pump. Tighten the clamp securely.
5. Connect the wire harness connector to the dosing pump by depressing the integral spring and pushing the connector toward the pump. Verify
connector installation.
6. Lower the vehicle
7. Reconnect the negative battery cable.
8. Verify function of the supplemental cabin heater.