Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
1. Carefully install the rear heater core into the rear HVAC housing. Make sure that the foam seals are properly installed and that the two retaining
tabs are fully engaged.
2. Install the screw that secures the heater core tube bracket to the rear HVAC housing. Tighten the screw to 2 Nm (17 in.lbs.).
3. Install the rear HVAC housing.
4. Reconnect the negative battery cable.
5. If the rear heater core is being replaced, flush the cooling system.
6. Refill the engine cooling system.
7. Evacuate the refrigerant system.
8. Charge the refrigerant system.
