Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Figure 2 Blower Motor Wire Lead Grommet
9. Carefully cut the foam seal along the parting line of the upper air inlet housing (Figure 3). If the seal is deformed or damaged, it must be replaced.
10. Remove the three screws that secure the upper air inlet housing to HVAC housing.
11. Remove the upper air inlet housing and recirculation-air door from the HVAC housing.
12. If required, remove the screw that secures the recirculation-air door to the upper air inlet housing and remove the air door.
Figure 3 Upper Air Inlet Housing
Air Inlet Housing Installation - Front
AIR INLET HOUSING
