dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Description - Front|Page 9061 > < Service Port HVAC|Removal|Page 9056
Page 1
background image

Solar Sensor: Description and Operation
Description - Front

DESCRIPTION

The infrared temperature sensor consists of two infrared transducers that are concealed behind a clear lens located near the top of the instrument panel
center bezel (Figure 1). These sensors are used only on models equipped with the optional automatic temperature control (ATC) heating-A/C system. A
molded plastic connector receptacle on the bottom of the panel outlet unit is concealed behind the center bezel. A short, dedicated jumper wire harness
routed behind the center bezel connects the sensors directly to the ATC A/C-heater control module near the bottom of the center bezel. The infrared
temperature sensor is integral to the center bezel panel outlet.

Figure 1 Infrared Temperature Sensor - RS shown, RG typical

Description - Front|Page 9061 > < Service Port HVAC|Removal|Page 9056