Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp
Removal
REMOVAL
Figure 1 PARK/TURN SIGNAL LAMP
1. Disconnect and isolate battery negative cable.
2. Remove headlamp retaining screws.
3. Twist socket counter - clockwise and remove (Figure 1).
4. Pull bulb from socket.
Installation
INSTALLATION
1. Push bulb into socket.
2. Twist socket into headlamp.
3. Install headlamp retaining screws.
4. Reconnect battery negative cable.
