Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Installation
INSTALLATION
When servicing throttle body components, always reassemble components with new O-rings and seals where applicable. If assembly of component is
difficult, a light coat of engine oil may be applied to the O-RINGS ONLY (Figure 1) to aid assembly. Use care when removing hoses to prevent damage
to hose or hose nipple.
Figure 1 O-RINGS
1. Carefully place idle air control motor into throttle body.
2. Install mounting screw. Tighten screw to 7 Nm (62 in. lbs.) torque.
3. Connect electrical connector to idle air control motor.
4. Connect negative cable to battery.