Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Power Sliding Door Module: Service and Repair
Installation
INSTALLATION
1. Position the sliding door control module and install the retaining screw.
2. Connect the electrical connectors. Slide the locking tab into the locked position.
3. Install the weather shield.
4. Install the appropriate door trim panel on the vehicle.
5. Connect the battery negative cable.
6. Using an appropriate scan tool, check and erase any power door control module diagnostic trouble codes.
7. Verify power door system operation. Cycle the power door through one complete open and close cycle.
