dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body Control Module|Page 456 > < Body Control Module
Page 2
background image

The BCM has 1 Lockout switch that when enabled will disable the B-Pillar sliding door switches from activating either sliding door when
depressed. When replacing a body control module there are 2 modules available, a Base and a Midline. The Midline controller is used on vehicles
that have Power Door Locks. If a vehicle is equipped with the Vehicle Theft Security System, the midline controller becomes a premium when the
theft feature is enabled.

NOTE:  Do not swap the body control module between vehicles or body control modules off the shelf.

Engineering does not recommend that service, dealers or the plant swap Body Control Modules (BCM) between vehicles or off the shelf. The BCM has
internal diagnostic capability that assists in diagnosing the system. When an "Open" or a "Short" circuit exists, the diagnostic tool can be used to read the
BCM codes. The codes are very descriptive in identifying the appropriate feature that has faulted. The BCM also learns what features are on the vehicle
and if modules are swapped the BCM could set false DTCs based on what it learned.

Body Control Module|Page 456 > < Body Control Module