Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Clockspring Assembly / Spiral Cable: Service and Repair
Removal
REMOVAL
1. Position steering wheel and front wheels straight ahead.
2. Release hood latch and open hood.
3. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component
service. Failure to do so may result in accidental airbag deployment, personal injury or death.
4. Remove driver airbag from steering wheel.
5. Disconnect wire connectors from back of driver airbag.
6. Disconnect the 2-way connector from remote radio control harness.
7. Disconnect the 4-way harness connector from the speed control/horn harness to the clockspring.
8. Remove steering wheel.
9. Remove steering column shrouds and disconnect traction control wire connector (if equipped).
10. Disconnect 4-way and 6-way connectors between the clockspring and the instrument panel wiring harness.
11. Remove clockspring from column assembly by removing the two retaining screws that attach the clock spring to the column.
