Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Repairs and Inspections Required After a Collision: Service and Repair
STANDARD PROCEDURE - SERVICE AFTER AN AIRBAG DEPLOYMENT
DRIVER AIRBAG
After a Driver Airbag has been deployed due to a collision, the following MUST be replaced:
-
Driver Airbag
-
Clockspring Assembly
-
Steering Wheel
-
Complete Steering Column Assembly w/Lower Steering Column Coupler
All other airbag and vehicle components should be closely inspected following any airbag deployment, and should be replaced when visible damage is
incurred.
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
PASSENGER AIRBAG
After a Passenger Airbag has been deployed due to a collision. the following MUST be replaced:
-
Passenger Airbag
-
Instrument Panel and Pad Assembly
All other airbag and vehicle components should be closely inspected following any airbag deployment, and should be replaced when visible damage is
incurred.
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
KNEE BLOCKER AIRBAG
After a Knee Blocker Airbag has been deployed due to a collision. the following MUST be replaced:
-
Knee Blocker Airbag
-
Instrument Panel and Pad Assembly
All other airbag and vehicle components should be closely inspected following any airbag deployment, and should be replaced when visible damage is
incurred.
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
CURTAIN AIRBAG
After a Curtain Airbag has been deployed due to a collision. the following MUST be replaced:
-
Curtain Airbag Assembly
-
Headliner
-
A, B, and C-Pillar Trim on deployed side.
All other airbag and vehicle components should be closely inspected following any airbag deployment, and should be replaced when visible damage is
incurred.
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
OCCUPANT CLASSIFICATION SYSTEM (OCS)
After an impact event, either front, rear, or side, the OCS system components need to be inspected and replaced if found to be damaged.
This includes:
-
Belt Tension Sensor
-
Occupant Classification Module (OCM)
-
Passenger Airbag ON/Off Indicator
-
Seat Weight Bladder and Sensor