dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wheel Hub > < Front Suspension|Page 8262
Page 3
background image

5.   Install brake drum or disc brake rotor and brake caliper. 
6.   Install wheel and tire. Tighten the wheel nuts in the proper sequence to 135 Nm (100 ft. lbs.).
7.   Adjust the rear brakes as necessary.
8.   Lower vehicle.
9.   Road test vehicle to ensure proper operation of brakes.

Figure 1 Sensor Connector At Hub And Bearing

Wheel Hub > < Front Suspension|Page 8262