Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
7. Shorten (back off) the adjuster screw (Figure 3) to minimum length, then spread the leading and trailing parking brake shoes apart and remove the
adjuster.
8. Remove the lower return spring from the leading and trailing parking brake shoes (Figure 3).
9. Pull the bottom of the trailing parking brake shoe rearward and retain it on the backing plate flange of the brake adapter (Figure 4).
Figure 4 Puller C-4150A On Wheel Stud
10. Install Remover, Special Tool C-4150A, on the hub and bearing flange and wheel stud (Figure 4).
11. Tighten the Remover, pushing the wheel mounting stud out the rear of the hub and bearing flange. When the shoulder of the stud is past the flange,
remove the Remover.
