dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

40TE Automatic Transaxle|Page 5460 > < 40TE Automatic Transaxle|Page 5455
Page 1
background image

Fluid Filter - A/T: Service and Repair
40TE Automatic Transaxle

FLUID AND FILTER SERVICE

NOTE: Only fluids of the type labeled Mopar(R) ATF+4 (Automatic Transmission Fluid) should be used. A filter change should be made at the
time of the transmission oil change. The magnet (on the inside of the oil pan) should also be cleaned with a clean, dry cloth.

NOTE: If the transaxle is disassembled for any reason, the fluid and filter should be changed.

FLUID/FILTER SERVICE (RECOMMENDED)

Figure 1 Filter and O-Ring

1.   Raise vehicle on a hoist. Place a drain container with a large opening under transaxle oil pan.
2.   Loosen pan bolts and tap the pan at one corner to break it loose allowing fluid to drain, then remove the oil pan.
3.   Install a new filter (1) (Figure 1) and O-ring (2) on bottom of the valve body.

40TE Automatic Transaxle|Page 5460 > < 40TE Automatic Transaxle|Page 5455