dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

40TE Automatic Transaxle|Page 5743 > < 40TE Automatic Transaxle|Page 5741
Page 1
background image

Shift Cable: Service and Repair
41TE Automatic Transaxle

Removal

REMOVAL

1.   Disconnect battery cables.
2.   Remove battery shield.
3.   Remove battery.
4.   Remove speed control servo and position out of way.
5.   Disconnect gear shift cable at manual valve lever (Figure 1).
6.   Disconnect gear shift cable from upper mount bracket (Figure 1).

Figure 1 Gearshift Cable at Transaxle - Typical

7.   Remove instrument panel lower silencer (Figure 2).

Figure 2 Instrument Panel Lower Silencer

1 - INSTRUMENT PANEL LOWER SILENCER

40TE Automatic Transaxle|Page 5743 > < 40TE Automatic Transaxle|Page 5741