dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Removal and Replacement|Page 5928 > < Removal and Replacement|Page 5926
Page 38
background image

12.   Remove check balls, (1 ) (Figure 12) (#4) ball check location, (2) (#2) ball check location, (3) retainer, (4) (#3) ball check location, (5)

low/reverse switch valve and (6) t/c limit valve.

Figure 13 Remove Dual Retainer Plate using Tool 6301

NOTE: Tag all valve/spring assemblies for reassembly identification.

13.   Remove dual retainer plate (2) (Figure 13) using Remover/Installer 6301(1).

Removal and Replacement|Page 5928 > < Removal and Replacement|Page 5926