Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Clutch Slave Cylinder: Service and Repair
Installation
INSTALLATION
1. Install clutch slave cylinder into position, noting orientation of different sized lugs. While depressing inward, rotate slave cylinder clockwise until
nylon locating tab rests in transaxle case cutout, and the hydraulic tube is vertical (Figure 1).
2. Connect "quick-connect" connection until an audible "click" is heard. Verify connection by pulling outward on connection.
3. Diesel models: Install underbody splash shield.
4. Lower vehicle.
Figure 1 SLAVE CYLINDER REMOVAL/INSTALLATION
