Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Hydraulic Hose: Service and Repair
Installation - LHD
INSTALLATION
1. Install master cylinder into position, while routing plumbing as originally installed.
2. Insert master cylinder pushrod through dash panel (Figure 4) and rotate 45° counter-clockwise to secure.
3. Connect master cylinder plumbing quick-connect fitting. An audible "click" should be heard. Verify connection by pulling outward.
4. Install master cylinder reservoir onto strut tower. Install and tighten two (2) master cylinder reservoir-to-strut tower nuts to 11 Nm (100 in. lbs.)
(Figure 4).
5. Install windshield wiper module assembly.
6. Install battery tray.
7. Install battery.
8. Install battery shield.
9. Connect master cylinder pushrod to clutch pedal lever (Figure 2). Install retainer clip.
10. Install knee bolster and instrument panel lower silencer (Figure 3) (Figure 1).
11. Connect battery cables.
Figure 1 INSTRUMENT PANEL LOWER SILENCER
1 - INSTRUMENT PANEL LOWER SILENCER
Figure 2 Master Cylinder Pushrod at Pedal
