Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Installation
INSTALLATION
LHD
1. Install upstop switch into bracket (Figure 4). Ensure switch wing tabs are fully expanded. If removed, re-install bracket and torque to 13 Nm (115
in. lbs.).
2. Connect upstop switch connector.
3. Install knee bolster (Figure 2).
4. Install instrument panel lower silencer (Figure 3).
5. Connect battery negative cable.
RHD
1. Install switch and bracket assembly. Torque nut to 12 Nm (110 in. lbs.) (Figure 1).
2. Connect upstop switch assembly (Figure 1).
3. Install knee bolster (Figure 2).
4. Install instrument panel lower silencer (Figure 3).
5. Connect battery negative cable.
Figure 1 Clutch Pedal Upstop Switch-RHD