Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Fluid - M/T: Testing and Inspection
Fluid Level Check
FLUID LEVEL CHECK
The fluid required in this transaxle is Mopar(R) ATF+4. Use of substitute fluids may result in improper transaxle operation and/or failure.
1. Raise vehicle on hoist.
2. Remove transaxle fill plug (Figure 1).
Figure 1 Transaxle Fill Plug
3. Inspect fluid level. Fluid should be within 3/16" below fill hole. Add Mopar(R) ATF+4 as necessary.
4. Install fill plug, ensuring it is properly seated.
5. Lower vehicle.
