dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Gearshift Cable - Crossover|Page 6164 > < Gearshift Cable - Crossover|Page 6162
Page 10
background image

12.   Install center console assembly (Figure 9). Install and torque center console-to-gearshift mechanism screws to 5 Nm (45 in. lbs.).

Figure 9 Center Console Removal/Installation (LHD Shown - RHD Typical)

13.   Install cupholder plugs (Figure 10).

Figure 10 Cup Holder Plugs

1 - CUPHOLDER PLUG (2)

14.   Install gearshift boot to console (Figure 11). Secure with three (3) retainer clips.

Gearshift Cable - Crossover|Page 6164 > < Gearshift Cable - Crossover|Page 6162