dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

D-Pillar Speaker|Page 8434 > < D-Pillar Speaker|Page 8432
Page 1
background image

Speaker: Service and Repair
Instrument Panel Speaker

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove the A-pillar trim.
3. Remove instrument panel top pad.

Instrument Panel Speaker

4. Remove speaker screws.
5. Disconnect wire harness connector and remove speaker.

INSTALLATION

1. Connect the wire harness connector and install speaker to instrument panel.
2. Install the speaker mounting screws.
3. Install instrument panel top pad.
4. Install A-pillar trim.
5. Connect battery negative cable.

D-Pillar Speaker|Page 8434 > < D-Pillar Speaker|Page 8432