Grand Caravan V6-3.3L VIN R (2005)
3. Engage clip to hold linkage rod to inside latch release handle.
4. Place front door trim panel in position on door.
5. Install trim panel into inner belt molding at top of door.
6. Install clips to attach door trim to door frame around perimeter of panel.
7. If equipped, install screw to attach door trim to door panel behind inside latch release handle.
8. If equipped, connect power switch into wire connector.
9. Place power accessary switch in position on door trim.
10. Connect wire connector into memory seat/mirror switch and install switch into trim panel.
11. Install screws to attach accessary switch panel to door trim.
12. Install screw cover into switch panel.
13. If equipped, install window crank.
14. If equipped, install screws to attach trim panel to door inside map pocket.
15. If equipped, install screw to attach door pull cup to inner door panel.
16. If equipped, install screws to attach door assist handle to inner door panel.
17. Connect wire connector into courtesy lamp.
18. Install lamp in door trim.
19. Install switch bezel.
