Grand Caravan V6-3.3L VIN R (2005)
Front Door Power Window
1. Insert front guide rail through front access hole.
2. Insert rear guide rail through rear access hole.
3. Place window regulator in position on inner door panel.
4. Place screw heads on guide rails in position through key hole slots in inner door panel.
5. Tighten screws to attach front and rear guide rails to inner door panel to 8.5 - 10.7 Nm (75 - 95 in. IDS.). Tighten using the sequence.
Front Door Power Window
6. Tighten screws to attach motor/housing to inner door panel to 2.8 Nm (25 in. lbs.).
7. Connect wire connector into power window motor.
8. Install door glass.
9. Verify door glass alignment and operation.
10. Install inner belt molding.
11. Install watershield.
