dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Doors, Hood and Trunk|Hood > < Fuel Fill Door|Page 9131
Page 2
background image

INSTALLATION

1. Insert link into clip on fuel fill door.
2. Engage clip to hold link to fuel fill door.
3. Insert lockout link through grommet in panel between inner and outer quarter panel.
4. Close fuel fill door.
5. Install fuel filler housing to outer quarter panel.
6. Verify that all clips on fuel filler housing are fully engaged to outer quarter panel.
7. Install screws attaching fuel fill housing to fuel filler tube neck.
8. Engage fuel filler lockout link into clip on fuel fill blocker latch arm.
9. Install water shield patch covering access hole in C-pillar.

10. Install left quarter trim panel.

Doors, Hood and Trunk|Hood > < Fuel Fill Door|Page 9131