Grand Caravan V6-3.3L VIN R (2005)
Passenger Assist Handle: Service and Repair
Handle - Grab
HANDLE - GRAB
REMOVAL
1. Turn headlamp switch to shut off reading lamp.
2. Hold handle downward and remove attaching screws.
Fig. 73
3. Pull handle inward to release handle clips from sheet metal (Fig. 73).
4. Disconnect wire connector from lamp, if equipped.
5. Remove grab handle from vehicle.
INSTALLATION
Fig. 74
1. Place grab handle into position (Fig. 74).
2. Connect lamp wire connector, if equipped.
3. Using 2-way locating pins press on grab handle until it snaps into place.
4. Install attaching screws.
5. Tug on handle to insure clips are properly installed.