Grand Caravan V6-3.3L VIN R (2005)
8. Disconnect the hold open latch cable from the latch assembly.
9. Disconnect lock actuator link rod from the latch assembly.
10. Remove the latch assembly from the vehicle.
INSTALLATION
Power Latch Position And Orientation
1. Position the latch assembly in the vehicle. Be certain all latch mounted components are installed on the replacement latch assembly. If not, transfer
components from the old latch to the new latch assembly.
2. Connect the lock actuator link rod on the latch assembly.
3. Connect the hold open latch cable on the latch assembly.
4. Connect the inside and outside handle cables on the latch assembly.
5. Connect all electrical connectors leading to the latch assembly.
Removing Latch Retaining Bolts
