Grand Caravan V6-3.3L VIN R (2005)
4. Install piston into caliper bore pushing it past the piston seal until it bottoms in the caliper bore (Fig. 40).
5. Position the dust boot into the counterbore of the caliper assembly piston bore.
6. Using a hammer and Installer, Special Tool C-4689 or C-4842 (depending on piston size), and Handle, Special Tool C-4171, drive the boot into
the counterbore of the caliper as necessary (Fig. 41).
7. Reinstall the caliper on the vehicle and bleed the brakes as necessary.
INSTALLATION - REAR DISC BRAKE CALIPER
1. Completely retract caliper piston back into piston bore of the caliper.
2. If removed, install the brake rotor on the hub, making sure it is squarely seated on the face of the hub.
CAUTION: Use care when installing the caliper assembly onto the adapter, so the caliper guide pin bushings do not get damaged by the
mounting bosses.
3. Carefully lower caliper and brake shoes over rotor and onto the adapter using the reverse procedure for removal (Fig. 37).
