dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/C - Condenser Stone/Road Debris Damage|Page 7328 > < A/C - Condenser Stone/Road Debris Damage|Page 7326
Page 1
background image

Condenser HVAC: Service and Repair

REMOVAL

WARNING:  REFER TO THE APPLICABLE WARNINGS AND CAUTIONS FOR THIS SYSTEM BEFORE PERFORMING THE
FOLLOWING OPERATION. FAILURE TO FOLLOW THE WARNINGS AND CAUTIONS COULD RESULT IN POSSIBLE PERSONAL
INJURY OR DEATH.

NOTE:  Before removing the A/C condenser, note the location of each of the radiator and condenser air seals. These air seals are used to direct air
through the A/C condenser and radiator. The air seals must be reinstalled in their proper locations in order for the A/C and engine cooling systems to
perform as designed.

1. Recover the refrigerant from the refrigerant system.
2. Remove the front fascia.

NOTE:  It is not necessary to remove the quick-connect fittings from the transmission oil cooler tapping block when disconnecting the
transmission oil cooler lines from the cooler.

A/C Condenser - Left Hand View

3. Disconnect the transmission oil cooler lines from the quick-connect fittings located on the transmission oil cooler tapping block on the left side of

the A/C condenser (combination cooler).

4. Disconnect the A/C discharge line and the A/C liquid line from the right side of the A/C condenser.

A/C - Condenser Stone/Road Debris Damage|Page 7328 > < A/C - Condenser Stone/Road Debris Damage|Page 7326