dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Ambient Temperature Sensor|Page 7623 > < Infrared Temperature Sensor|Page 7620
Page 1
background image

Ambient Temperature Sensor / Switch HVAC: Testing and Inspection
Ambient Temperature Sensor

1. Turn the ignition switch to the Off position. Disconnect and isolate the battery negative cable. Disconnect the ambient temperature sensor wire

harness connector.

2. Measure the resistance of the ambient temperature sensor. At room temperature (approx. 68° F), the sensor resistance should be between 10-13

Kilohms. The sensor resistance should be between these two values at 68° F. If the resistance is out of range replace the ambient temperature
sensor.

Ambient Temperature Sensor|Page 7623 > < Infrared Temperature Sensor|Page 7620