Grand Caravan V6-3.3L VIN R (2005)
time.
6. Attach pressure hose routing bracket to engine (Fig. 22). Tighten bolt to 23 Nm (200 inch lbs.) torque.
7. Tighten hose tube nut at pump outlet fitting to 31 Nm (275 inch lbs.) torque.
8. Route hose behind cradle crossmember and start hose end into gear port. Do not tighten hose tube nut at this time.
9. Attach hose to suspension cradle crossmember and steel reinforcement using two routing clamps and bolts (Fig. 21). Tighten clamp bolt at steel
reinforcement to 11 Nm (100 inch lbs.) torque. Tighten clamp bolt at cradle crossmember to 23 Nm (200 inch lbs.) torque.
10. Tighten hose tube nut at power steering gear port to 31 Nm (275 inch lbs.) torque.
11. Install front emissions vapor canister.
12. Lower vehicle.
13. Fill and bleed the power steering system using the Power Steering Pump Initial Operation Procedure.
14. Inspect system for leaks.
