Grand Caravan V6-3.3L VIN R (2005)
7. Remove PCM.
INSTALLATION
1. Install the PCM.
2. Install the lower PCM mounting bolt. Tighten bolt.
3. Install the 2 upper PCM bracket bolts. Tighten bolt.
4. Install the headlamp.
5. Install the 2 PCM connectors.
6. Install the battery shield.
7. Connect the negative battery cable.
NGC Controller
REMOVAL
NGC Controller Location
The PCM engine control strategy prevents reduced idle speeds until after the engine operates for 320 km (200 miles). If the PCM is replaced after 320
km (200 miles) of usage, update the mileage and vehicle identification number (VIN) in the new PCM. Use the DRBIII(R) scan tool to change the
millage and VIN in the PCM. If this step is not done a Diagnostic Trouble Code (DTC) may be set.
1. Turn wheels to the left.
2. Disconnect the negative battery cable.
3. Raise vehicle and support.
Splash Shield
