dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

18-004-07 > < Engine, A/T Controls - Harsh 1-2/2-3 A/T Shifts|Page 4930
Page 3
background image

NOTE:

Due to the PCM programming procedure, a DTC may be set in other modules (TCM, BCM, MIC, SKIM, etc.) within the vehicle, if so equipped.
Some DTC's may cause the MIL to illuminate. Check all modules using "Module Scan", record the DTC's, and erase these DTC's prior to returning
the vehicle to the customer. Erase any DTC's in the PCM only after all other modules have had their DTC's erased.

13.

With the DRBIII(R) perform the Quicklearn procedure.

NOTE:

The following step is required by U.S. law.

14.

Type the necessary information on the "Authorized Modification Label p/n 04275086AB and attach near the VECI label (Fig. 1).

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

18-004-07 > < Engine, A/T Controls - Harsh 1-2/2-3 A/T Shifts|Page 4930