Grand Caravan V6-3.3L VIN R (2005)
PARTS REQUIRED:
SPECIAL TOOLS/EQUIPMENT REQUIRED:
NOTE:
An updated J1962 cable has been released. This cable has a red colored connector at the DRBIII(R) connection. Use this cable whenever a flash is
being preformed.
REPAIR PROCEDURE 1:
Replace spark plugs and ignition cables
1.
Replace the spark plugs and ignition (spark plug) cables. Refer to the service information available in TechCONNECT or the Town & Country
and Caravan service manual (publication no. 81-370-04062CD), page 8I-10.
2.
If Service Bulletin 18-016-04 has not been performed, proceed to Repair Procedure 2. If Service Bulletin 18-016-04 has been performed, no
further action is necessary.
REPAIR PROCEDURE 2:
Flash Reprogram PCM
NOTE:
Whenever a controller is programmed, the software in the DRBIII(R); must be programmed with the latest revision level available.
NOTE:
If this flash process is interrupted/aborted, the flash should be restarted and then follow the directions on the DRBIII(R).
1.
Before beginning the reprogramming procedure, remove any old flash reprogramming files from the DRBIII(R) memory. To clear the memory
from the MAIN MENU:
a.
Simultaneously press the "MORE" and "YES" keys.
b.
A screen will appear requesting a "COLD BOOT".
