dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

System Description|Page 420 > < System Description
Page 2
background image

-

Sentry Key Immobilizer Module (SKIM) The BCM is operational when battery power is supplied to the module.

The BCM provides the following features:

-

Power Door Locks

-

Automatic Door Locks

-

Battery Protection

-

The BCM will automatically turn off all exterior lamps after 3 minutes, and all interior lamps after 15 minutes after the ignition is turned off, if
they are not turned off by the driver.

-

Chime Control

-

Compass/Mini-Trip support.

-

Interior Lighting (Courtesy/Reading Lamps)

-

BCM Diagnostic Reporting

-

Electronic Liftgate Release (with Power Door Locks)

-

Exterior Lighting

-

Headlamp Time Delay (with/without Automatic Headlamps)

-

Illuminated Entry

-

Fade to Off Interior Lamps - This feature dims the interior lighting (courtesy lamps) gradually if the BCM does not receive any new inputs that
would cause the interior lamps to remain on.

-

Pulse Width Modulated Instrument Panel Dimming

-

Door Lock Inhibit - This feature disables the door lock functions if the key is in the ignition and either front door is ajar. Pressing the Remote
Keyless Entry (RKE) lock/unlock button under these conditions result in normal lock/unlock activation.

Learned Features

The BCM has the ability to LEARN additional features in the vehicle, provided the appropriate switch input and PCI data bus messages are received.
Refer to the LEARNED FEATURES table.

When replacing a BCM there are three modules available:

-

Base

-

Midline

-

RG - Export

System Description|Page 420 > < System Description