dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Remote Switch, Audio - Stereo|Diagrams|Page 763 > < Remote Switch, Audio - Stereo|Diagrams
Page 1
background image

Remote Switch: Description and Operation

Remote Radio Switch Operational View

Two rocker-type switches (if equipped) are mounted on the back (instrument panel side) of the steering wheel spokes. The switch on the left spoke is the
seek switch and has seek up, seek down, and preset station advance functions. The switch on the right spoke is the volume control switch and has volume
up, and volume down functions. The switch on the right spoke also includes a "mode" control that allows the driver to sequentially select AM radio, FM
radio, cassette player, CD player or CD changer (if equipped).

These switches are resistor multiplexed units that are hard-wired to the Body Control Module (BCM) through the clockspring. The BCM sends the
proper messages on the Programmable Communications Interface (PCI) data bus network to the radio receiver. For diagnosis of the BCM or the PCI
data bus, the use of a DRB III(R) scan tool and the proper Diagnostic Procedures manual are recommended.

Remote Switch, Audio - Stereo|Diagrams|Page 763 > < Remote Switch, Audio - Stereo|Diagrams