dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Blower Motor Switch > < Ambient Temperature Sensor|Page 948
Page 1
background image

Ambient Temperature Sensor / Switch HVAC: Service and Repair

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. From behind the front bumper fascia, remove the screw holding the sensor to the radiator closure panel.
3. Disconnect the sensor electrical connector.
4. Remove the sensor from vehicle.

INSTALLATION

1. Position the sensor in the vehicle and connect the sensor electrical connector.
2. From behind the front bumper fascia, install the sensor mounting screw.
3. Connect the battery negative cable.

Blower Motor Switch > < Ambient Temperature Sensor|Page 948