Grand Caravan V6-3.3L VIN R (2005)
1. Travel Restrictor
2. Inner Tie Rod
3. Hex For Removal/Installation
3. Install inner tie rod onto gear using appropriate inner tie rod installer tool or crows foot wrench. While holding rack gear stationary using an
appropriate size wrench placed on exposed section of rack gear tighten inner tie rod to 78 N.m, (58 ft. lbs.).
4. Apply a small amount of Mopar® Lubriplate or equivalent uniformly to groove in inner tie rod shaft where bellows mounts. This allows for toe
adjustment without twisting bellows.
5. Place new transfer tube clamp over transfer tube past where bellows will mount.
6. Loosely place new clamp over large end of bellows.
7. Slide new bellows with clamp over end of inner tie rod and onto gear body and transfer tube.
8. Push small end of bellows past groove machined into inner tie rod, then pull it outward until ridge inside bellows engages groove.
