dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

41TE Automatic Transmission|Page 5385 > < 41TE Automatic Transmission|Page 5383
Page 3
background image

The turbine (Fig. 295) is the output, or driven, member of the converter. The turbine is mounted within the housing opposite the impeller, but is not
attached to the housing. The input shaft is inserted through the center of the impeller and splined into the turbine. The design of the turbine is similar
to the impeller, except the blades of the turbine are curved in the opposite direction.

STATOR 

41TE Automatic Transmission|Page 5385 > < 41TE Automatic Transmission|Page 5383