Grand Caravan V6-3.3L VIN R (2005)
Power Window Switch: Testing and Inspection
1. Remove the desired switch to be tested from the door trim panel. Driver's side (master) or passenger side.
Power Window Master Switch Connector
2. Using an ohmmeter, Test driver door switch for continuity as described.
Power Window Master Switch Test
3. If the result are not OK, replace the driver side window lift switch.
* MUST TEST WITH B+ ON PIN 9 AND GROUND ON PIN 13 FOR CONTINUITY BETWEEN PINS 11 AND 6
Passenger Door Power Window Switch
4. Test passenger door switch for continuity as described.
