dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Wiper Motor Inspection/Replacement|Page 10582 > < Recall - Wiper Motor Inspection/Replacement|Page 10580
Page 7
background image

2.

Disconnect the washer hose at the in line connector located near the air cleaner (Figure 5).

3.

Lift the cowl grill and disconnect the washer hose grommet from the hole in the wiper module. Pull the washer hose and the grommet completely
through the wiper module tub hole.

4.

Remove the cowl grill.

NOTE

Be careful not to scratch the cowl grill on fenders or the corner of the hood.

5.

Remove the four fence nuts holding the wiper module inner brace to the lower windshield fence (Figure 6).

Recall - Wiper Motor Inspection/Replacement|Page 10582 > < Recall - Wiper Motor Inspection/Replacement|Page 10580