dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body and Frame > < Towing Information|Service and Repair
Page 2
background image

miles). The steering column must be unlocked and gear selector in neutral.

-

AWD models should not be flat towed. For additional information, refer to RECOMMENDED TOWING EQUIPMENT.

FLAT BED TOWING TIE DOWNS

CAUTION: Do not tie vehicle down by attaching chains or cables to suspension components or engine mounts, damage to vehicle can result.

The vehicle can be tied to a flat bed device using the two pair of front slots on the bottom surface of the rails, behind the front wheels. The two pair of
rear slots on the bottom of the rail between the bumper extension bolts and on the bottom of the rail just rearward of the jounce bumper. Vehicles
equipped with a rear sway bar have brackets at this location.

TOWING - FRONT WHEEL LIFT

If the vehicle is being towed from the front, whenever possible ensure at least 10 inches road clearance to the tires.

TOWING - REAR WHEEL LIFT

If a vehicle cannot be towed with the front wheels lifted, the rear wheels can be lifted provided the following guide lines are observed.

CAUTION: Do not use steering column lock to secure steering wheel during towing operation.

-

On AWD vehicles, all four wheels must be free to rotate. Use towing dollies at unlifted end of vehicle.

-

Unlock steering column and secure steering wheel in straight ahead position with a clamp device designed for towing.

-

Three speed automatic transaxle vehicles can be flat towed at speeds not to exceed 40 km/h (25 mph) for not more than 25 km (15 miles). The
steering column must be unlocked and gear selector in neutral.

-

Four speed electronic automatic transaxle vehicles can be flat towed at speeds not to exceed 72 km/h (44 mph) for not more than 160 km (100
miles). The steering column must be unlocked and gear selector in neutral.

Body and Frame > < Towing Information|Service and Repair