Grand Caravan V6-3.6L (2011)
14. Identify the stamping's on the right and left gears and remove the spline from the right side gear. Remove the spline from one of the right gear (Fig.
13).
15. Using a flat blade screw driver adjust the gear so the right and left side stamping's align parallelly (Fig. 14).
16. Reinstall the gear spline (Fig. 13).
17. Re-secure the left and right outer gear bolts (Fig. 12).
18. Install the left and right seatback side bolts (Fig. 11).
19. Install the seat recliner motor bolt (Fig. 10).
20. Re-secure the seat back panel support clips (Fig. 9).
