Grand Caravan V6-3.6L (2011)
Programming - Gas. After PCM reprogramming, the following must be performed:
a. Clear any DTC's that may have been set in other modules due to reprogramming. The wiTECH application will automatically present all DTCs
after the flash and allow the tech to clear them.
b. On 62TE equipped vehicles clear the Variable Line Pressure (VLP) Counters, found in the Misc Function menu for the PCM ECU.
c. Perform the Quick Learn function, found in the Misc Function menu for the TCM ECU.
2. Type the necessary information on the "Authorized Modification Label" and attach it near the VECI label.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
