dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Rear Bumper Fascia - Removal|Page 7663 > < Body - Rear Bumper Fascia Bulge/Bow or Bend|Page 7660
Page 1
background image

Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Fascia - Removal

REMOVAL

1. Open liftgate.
2. Remove attaching screws (2) from the upper fascia (3) to the liftgate tower, right side and left side.
3. Raise and support the vehicle.

4. Remove the three screws (2) on each side attaching the rear fascia (5) to wheel openings (1) on right side and left side
5. Remove the four plastic push pins (4) attaching the bottom of rear fascia (5) to fascia support (3).

Rear Bumper Fascia - Removal|Page 7663 > < Body - Rear Bumper Fascia Bulge/Bow or Bend|Page 7660