dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Power Sliding Door Wiring|Page 7933 > < Recall - Power Sliding Door Wiring|Page 7931
Page 11
background image

5. Release the chain link track from the lower hinge pivot by pushing the locking tab forward and then push the chain link downward (Figure 10).

6. Install the supplied tab/wedge on the lower hinge pivot located on the sliding door lower hinge (Figure 10).

NOTE

The tab/wedge must have the "L" facing up on the drivers side of the vehicle and the "R" facing up on the passenger side of the vehicle (Figure 11).

7. While holding the tab/wedge in place, snap the chain link to the lower hinge pivot.

8. Lock the chain link in place by pushing the locking tab rearward (Figure 10).

9. Repeat Section A on the passenger (right) side sliding door.

Recall - Power Sliding Door Wiring|Page 7933 > < Recall - Power Sliding Door Wiring|Page 7931