Grand Caravan V6-3.8L (2009)
13. Install a piece of shrink tube over one of the cut wires (Figure 16)
14. Insert both cut wires into the splice band and crimp them together using wire splice crimp tool 10042 (Figure 16).
15. Using rosin core solder and a soldering gun, solder the wiring connection at the splice band (Figure 17).
16. Center the shrink tube over the soldered wire connection made in Step 15.
17. Heat the shrink tube with a heat gun until it shrinks around the wire and glue comes out of both ends of the shrink tube (Figure 18).
18. Repeat Steps 10 - 17 on all chaffed wires.
