dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body - Power Sliding Door Will Not Power Open|Page 7960 > < Power Sliding Door Wiring Harness - Removal|Page 7951
Page 1
background image

Sliding Door Interior Trim Panel: Customer Interest
Body - Power Sliding Door Will Not Power Open

NUMBER: 23-005-10

GROUP: Body

DATE: March 02, 2010

SUBJECT:
Power Sliding Door Will Not Power Open

OVERVIEW:
This involves removing the sliding door trim panel and modifying the foam isolator around the handle link on the right and/or left side.

MODELS:

2009-2010

(RT)

Caravan/Town and Country

NOTE:

This bulletin applies to vehicles built before February 12, 2010 (MDH0212XX).

SYMPTOM/CONDITION:
The customer may experience the power sliding door of the right and/or left side not opening when using the interior or exterior handles or interior
B-pillar button from full closed position but works with remote keyless entry and the front row overhead console buttons.

NOTE:

The sliding door will power close and properly function in all manual operations.

DIAGNOSIS:
This procedure only address vehicles that do not power open using the interior and exterior handles or interior B-pillar button from full closed position.
This does not address any closing issues.

REPAIR PROCEDURE:

1. Remove the door trim panel right and/or left side. Refer to the detailed procedures available in DealerCONNECT > TechCONNECT > : Service Info

> 23-Body > Doors - Sliding > PANEL, Door Trim > Removal.

Body - Power Sliding Door Will Not Power Open|Page 7960 > < Power Sliding Door Wiring Harness - Removal|Page 7951