Grand Caravan V6-3.8L (2009)
Sliding Door Latch: Service and Repair
Latch Bellcrank - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the sliding door trim panel. See: Sliding Door Interior Trim Panel/Service and Repair/Door Trim Panel - Removal.
3. Remove the door module assembly. See: Service and Repair/Carrier Plate - Removal.
4. Remove the locking rod at the front of the door module assembly.
5. Remove the inside handle actuator mounting fastener.
6. Slide the actuator and locking rod forward and remove the locking rod from the actuator.
7. Remove the locking rod bellcrank from the door module assembly.
