Grand Caravan V6-3.8L (2009)
5. Did the door stay in the fully (latched) open position?
a. Yes >>> Install the interior sliding door trim panel. Refer to the detailed Installation procedures available in DealerCONNECT >
TechCONNECT > : Service Info > 23-Body > Interior > Doors - Sliding > Panel, Door Trim > Install. Return the vehicle to the customer.
b. No >>> Install the interior sliding door trim panel. Refer to the detailed Installation procedures available in DealerCONNECT >
TechCONNECT > : Service Info > 23-Body > Interior > Doors - Sliding > Panel, Door Trim > Install. Proceed to Step # 6.
6. Remove the sliding door scuff plate on the right and/or left side.
Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT > : Service Info > 23-Body > Interior> PLATE, Scuff,
Sliding Door > Removal.
7. Remove the bolts shown in (Fig. 2) number 1 to slightly lower the latch bracket.
8. Stack two washers and install them between the floor and the latch bracket at each bolt location (Fig. 2) number 2.
9. Re-install the latch bracket bolts and verify the sliding door will latch in the full open position by opening and closing the door 5 times.
10. Re-install the sliding door scuff plate. Refer to the detailed installation procedures available in DealerCONNECT > TechCONNECT > : Service
Info > 23-Body > Interior> PLATE, Scuff, Sliding Door > Installation.
11. Return the vehicle to the customer
